{"title":"Gifts for Him","description":"\u003cp\u003ePremium wooden mechanical model kits and 3D puzzles — perfect gifts for him.\u003c\/p\u003e","products":[{"product_id":"trimaran-merihobus","title":"Trimaran Merihobus","description":"\u003ch2 data-mce-fragment=\"1\"\u003eWooden puzzle Trimaran Merihobus – 3D mechanical sailboat by Ugears\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCarried by the wayward wind of travel, the graceful and stylish Trimaran Merihobus from Ugears invites you to leave your peaceful harbour and sail away on an exciting marine mechanical adventure.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe bench model Trimaran is a classic multihull sailboat designed to show off a great deal of details such as winches, rigging, and hulls, which makes her a very realistic miniature copy of real-life prototypes.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSail away with this outstanding graceful sea beauty. Where will she take you today - around-the-world cruise? overseas expedition? Leave the rough seas of the daily grind and voyage to faraway lands with the Trimaran Merihobus from Ugears.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCarried by the wayward wind of travel, the graceful and stylish Trimaran Merihobus from Ugears invites you to leave your peaceful harbour and sail away on an exciting marine mechanical adventure.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe body of the sailboat is made in the “skeleton” style to ensure good visibility of the mechanism and the design of the sailboat, including such details as bulkheads, frames and beams. The rear rudder blade is steered by the ropes connected through the pontoons to the master wheel on the stern. The hydrofins on the side of the pontoons make the model stable and steady while creating a visual effect of the elevation of the model. The side pontoons are attached to the main body with a load frame designed to match the style of the hulls. Also, they carry a boat davit mechanism with a winch.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mainsail and fore staysail on the mast can be set or taken in, just like on real trimarans. The mainsail of the Trimaran Merihobus is set on the mast groove with the main top halliard. The staysail “rolls up” on a stay. At the front under the bowsprit you will find the staysail’s winch drum. Sail booms are operated by a lever that pulls the sheet of the boom.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe anchor cable winch based inside the Trimaran’s body has an automatic-tensioning mechanism that picks up an anchor. The Ugears’ designers used a strong but thin white thread for the rigging of the Merihobus. This ensures the structure of the boat remains neat and light even with a lot of details while making the mast and other elements remain in their positions. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAnd of course one mustn’t miss a lovely little finishing touch - a tiny seahorse carved in the bow of the boat. The curious sea creature known also as the merihobus gave your boat her name.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Ugears Trimaran Merihobus model kit is made of  high grade wood and has everything you might need for assembly.  The quality of the parts is top-notch: a laser method is used for cutting items from a plywood board that provides precise hairline cuts. The details have to be pulled out of the boards and assembled to create a complete model. Like all other Ugears models, the Trimaran Merihobus comes with step-by-step, full-color, truly easy to follow instructions in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Russian, Turkish, Italian, Chinese and Korean) and requires neither glue nor special tools to be fully assembled into functional sailboat.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eModel size: 41*23.5*56 cm\u003cbr\u003ePackage size: 37.5*17*3.5 cm\u003cbr\u003e\u003cbr\u003eNumber of components: 237\u003cbr\u003eEstimated time of assembly: 12-15 hours\u003cbr\u003eLevel: Advanced\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/Trimaran_Merihobus_assembly_instructions_4820184120891.pdf?v=1629306629\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePDF instruction\u003c\/a\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":40044033278161,"sku":"70059","price":57.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/products\/Ugears-Trimaran-Merihobus-Sailoat-Mechanical-Model-DSC8293.jpg?v=1628847001"},{"product_id":"aero-clock-wall-clock-with-pendulum","title":"Aero Clock. Wall Clock with Pendulum","description":"\u003ch2 data-mce-fragment=\"1\"\u003eAero Clock. Wall clock with pendulum – wooden mechanical 3D puzzle from UGEARS\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe time has come! For years, we've been hearing the same question again and again from our loyal customers: \"Can Ugears create a working clock model kit, one that actually keeps accurate time?\" A working mechanical wooden clock has long been our #1 \"most-requested\" new design. Your dream has also been our dream, and our team of dedicated Ugears engineers and designers has been working hard to bring this shared dream into reality. Finally, the wait is over. Ugears is proud to present the Aero Clock, a fully-functioning DIY wall clock with pendulum.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Aero Clock isn't just a 3D wooden mechanical model, or a pretty showpiece. The Ugears Clock is an actual working clock that you can build yourself, mount to a wall, wind up, then watch as the seconds, minutes, and hours tick by. The Aero Clock is an ingenious puzzle and DIY clock mechanism, unlike any other clock. It is a lovely piece of precise engineering that reveals the workings of a weighted pendulum clock to builders and viewers alike. Like all Ugears models, it also has that extra touch of whimsy, to captivate and charm our growing legion of fans.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis simple-yet-elegant Ugears clock is driven by the force of gravity pulling down a weighted bag (you can fill the bag with sand or salt). Raise the bag on its pulleys to wind the clock. As the weight slowly descends, it rotates a drive gear, which then rotates an escape wheel through a reducer. The clock features an adjustable weighted pendulum which interacts with the escape wheel through the steady tick-tock of the anchor mechanism. You can adjust the clock's ticking action to the second, by sliding the pendulum's top and bottom weights. The reducer also transmits rotation to an hour disc and a minute disc. One of the interesting features of our Aero Clock is that time is not read with rotating hands on a clock face, but rather a fixed pointer indicates time on the slowly-rotating, numbered hour and minute discs. Moreover, these discs rotate counterclockwise—did you know that before standardization, some clocks moved clockwise while others moved counterclockwise? In the role of \"cuckoo” the Ugears Aero Clock features a model hot air balloon. The suspended balloon rapidly descends when the hour strikes, then slowly rises again over the course of the next hour.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe theme of the Aero Clock is early aeronautics. Take a trip back in time to the dawn of flight and the \"balloonomania\" that seized France and England in 1783 on the occasion of the first free aerial voyage in a balloon. This was followed two years later by the first aerial crossing of the English Channel by intrepid aeronauts Jean-Pierre Blanchard and John Jeffries. We love this wooden model clock's steampunk sensibility and spirit of adventure, and we think you will too! Imagine yourself a discoverer of new horizons and a conqueror of the four winds. The casing and intriguing wooden clock mechanism represent an air base located among the clouds, where zephyrs blow and filtered rays of sunlight dapple the machinery, while you, in the role of aeronaut, launch a new voyage of exploration on the hour.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Ugears wooden model clock kit celebrates the role of clocks in exploration. Did you know the problem of calculating longitude, critical to accurate navigation at sea, was solved with a clock? The idea was proposed by Dutch mathematician Gemma Frisius in 1530, but it wasn't until the mid-18th century when English clockmaker John Harrison developed a series of shipboard clocks so precise (accurate to within a ⅕ of a second per day) that ship captains could at last calculate their position at sea to within a few nautical miles. By knowing the exact time back in London (Greenwich Meridian Time, or GMT), and calculating the time at current position with celestial observation, navigators could calculate where they were on the earth's surface. Latitude had been solved by the Phoenicians as early as 600 B.C. with celestial reckoning—measuring the altitude of the sun at noon, or the angle made between the North Star (or other navigational stars) and the horizon. But the longitude problem would bedevil explorers for another 2,000 years. Harrison was eventually awarded the £20,000 first prize (roughly $1.5 million today) established in Parliament's Longitude Act of 1714, after demonstrating the accuracy of his masterful clocks at sea. Now you too can become a clockmaker, with the Ugears Aero Clock model kit!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReleased at a moment when the world seems to have slowed down, the Ugears Aero Clock, a wooden wall clock with pendulum that you build yourself, is both timeful and timeless in its simple elegance. This beautiful and functional wooden wall clock model is for horologists, for hobbyists, for explorers, for creatives and romantics of every stripe, anyone who is ready for new challenges and ready to take risks. If you've ever gazed up at the sky and thought, \"I want to be there!\" or looked at a pendulum clock and wondered, \"How does that work?\" then the Ugears Aero Clock is for you.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eModel size: 75*47*16.5 cm\u003cbr\u003eMaximum size of the model: 220*47*16.5 cm\u003cbr\u003ePackage size: 37.8*17*5 cm\u003cbr\u003e\u003cbr\u003eNumber of components: 320\u003cbr\u003eEstimated time of assembly: 11 hours\u003cbr\u003eLevel: Advanced\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/Aero_clock_assembly_instruction.pdf?v=1629306629\" target=\"_blank\"\u003ePDF Instruction\u003c\/a\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":40044104712401,"sku":"70154","price":89.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/products\/DSC6001.jpg?v=1629118167"},{"product_id":"drift-cobra-racing-car","title":"Drift Cobra Racing Car","description":"\u003ch2 data-mce-fragment=\"1\"\u003eDrift Cobra Racing car – the new supercar in Ugears Automotive collection\u003c\/h2\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAssemble me. Burn tires!\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe know you love car modelling and you love the Ugears Dream Cabriolet, Roadster, and U-9 Grand Prix. Well, make room on the shelf, because a powerful new mechanical model just muscled its way into the Ugears Automotive collection. Introducing the Drift Cobra Racing Car, a beautifully-styled, two-seat convertible—our twist on what may be the most revered sports car of all time: the Shelby Cobra 427. The Cobra 427, produced between 1965-67, had a 7.0 litre 450-510 horsepower engine, did 0-60 mph in just over 4 seconds, and had a top speed of 185 mph.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCarroll Shelby, a former race car driver and automotive designer, was hired by the Ford Motor Co. to develop a high performance racer able to compete with the dominant Italian race team of Ferrari. The Americans' four consecutive victories at the prestigious Le Mans 24-hour race between 1966-69, in Ford GT40s, is the stuff of legend. More recently, it was the subject of the Oscar-winning 2019 film, \"Ford v Ferrari,\" starring Matt Damon as Shelby and Christian Bale as Ken Miles, the ace driver for the 1966 Ford team. The success of the cars coming out of Shelby's surfside Venice, California shop were the crest of a wave of American high performance supercars or muscle cars, characterized by powerful V8 motors placed into relatively lightweight, mass-produced, rear-wheel drive chassis. The Shelby Cobra stands out as an American icon, perhaps the greatest muscle car and most \"posterized\" car in history.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned for drag racing but street legal, muscle cars offer incredible automotive power at a relatively affordable price point. The scarcity and unbelievable auction prices today of some of these classic street beasts is due in no small part to the fact that they were often more car than their owners could handle, resulting in frequent crashes. Muscle cars have squared off in many an illegal street race, sometimes with ownership papers on the line (another way to lose your muscle car!). In that spirit, why not convene a gathering of model building friends, show off your newly-built Ugears Drift Cobra Racing Cars, put your car modelling prowess to the test and race for pinks! But remember: the first rule of Ugears race club is: you do not talk about Ugears race club. The second rule of Ugears race club is: you do not talk about Ugears race club!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDriven by a powerful spring motor, the Ugears Drift Cobra racing car has the fastest team of horses under the hood of any mechanical wooden model we know. The model is wound by means of a ratchet knob under the chassis. Before winding your 3-D wooden Drift Cobra model racing car, move the air filter that protrudes from the hood toward the windshield, and flip the switch in front of the passenger-side seat into the Lock position (parallel to the door). Now twist the ratchet underneath the car's body. After 6 to 6.5 turns of the knob the spring is fully loaded, and — vroom! vroom! — your racer is ready to roar! Set the gear shift lever, located between the driver and passenger seats, to the desired position (Reverse, Neutral, Drive). To start the model, set it down on a flat surface, slide the air filter forward, and watch your Cobra lay rubber in a spin out (start with the wheels turned to one side), do circles, or speed down the track in a straight line.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe think this 3D puzzle \/ DIY model is a beaut, with its fat tires, bulging curves (thanks to pieces that are precision laser-cut into fine 1mm plywood), a big open mouth up front, and open-air convertible design. This wooden car's moving parts include turning front wheels, doors that open, and a hood and trunk that can be raised. Instead of a rubber band motor we've used a powerful spring mechanism to provide the \"muscle\" in this racer and extend the model's usable life. The ratchet mechanism means you don't have to hold the knob the entire time you're winding the model—potential energy is stored with each twist, without slippage, until the strong internal spring is fully loaded.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo put the model in \"drift mode,\" turn the front wheels fully to one side or the other, set it down on a smooth surface such as tile, and watch as the model peels out in a sideways skid (ideally, your model should make a half to a full revolution before continuing forward, depending on the driving surface and turn angle of the wheels). When the wheels are set in their straight position, the model covers a lot of ground—8 meters or more! Set the wheels in a gentler turn, or put the racer down on a less slippery surface, and watch your Drift Cobra complete two or three full circles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe DIY model kit for the Drift Cobra Racing Car includes 370 parts, with an estimated assembly time of nine hours, and is rated Advanced level. Why not take a page out of Carroll Shelby's book and experience the pride and satisfaction of building a beautiful, functional automotive machine with your own hands. Everything you need for this challenging but doable DIY wooden puzzle project comes right in the box: high quality plywood boards with precision laser-cut pieces that you snap out then snap together without need of glue or special tools, a metal spring that powers the mechanism, and of course a set of detailed, illustrated instructions in 11 languages.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUgears model kits appeal to builders and hobbyists who love quality, clever design, and who appreciate ingenious mechanical elements with real world analogues. The Ugears Drift Cobra Racing Car is a great DIY idea and perfect gift idea for the car lovers among your circle of friends and family. Anyone who loved the film Ford v Ferrari, who loves car modelling, DIY projects, 3D puzzles, or who appreciates outstanding mechanical and aesthetic design, is going to love the Drift Cobra Racing Car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eModel size: 25.5*21*11.5 cm\u003cbr\u003ePackage size: 37.8*17*3.3 cm\u003cbr\u003e\u003cbr\u003eNumber of components: 370\u003cbr\u003eEstimated time of assembly: 9 hours\u003cbr\u003eLevel: Advanced\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePDF instruction\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":40576970522833,"sku":"70181","price":62.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/products\/DSC1997.jpg?v=1638984070"},{"product_id":"sky-watcher-tourbillon-table-clock","title":"Sky Watcher Tourbillon Table Clock","description":"\u003cdiv class=\"gt-text\" data-mce-fragment=\"1\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eSky Watcher Tourbillon Table Clock – the new functional clock by Ugears\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Clockwork Universe theory favored by 17th C deists held that the Earth and the heavens, and all their motions, were like a giant clock, with God as the Clockmaker. Newton's three laws of motion and the principle of universal gravitation were thought to be sufficient to explain phenomena of any kind, using mechanical conceptions. At Ugears we love mechanical conceptions! And so with a nod to Isaac Newton, we present the Sky Watcher Tourbillon Table Clock, a fascinating combination of imaginative celestial observatory and functional table clock!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor years, Ugears fans around the world clamored for us to create a functional wooden clock model. Together with the gravity powered, wall-mounted Aero Clock, and now the spring-loaded Tourbillon Table Clock, we have doubly delivered! Clocks are complex mechanisms. We bet you never thought you could build your own clock out of wood, and have it keep accurate time! But with Ugears models, you become a creative partner in an amazing mechanical adventure. To create this amazing DIY clock made out of natural wood, our designers and engineers solved complex problems of friction, gearing, tooth strength, torsion of the clock body and tourbillon axles under spring load. Now the challenge is yours, to build it, bring it to life, and become the clockmaker in your own steampunk universe.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe standout feature of this functional and beautiful wooden model table clock is the rotating tourbillon that sits on top. In wrist and pocket watches a tourbillon mechanism helps increase accuracy by counteracting the effects of gravity when the watch is stationary. By seating the escape and balance wheel within a rotating cage, slight errors in timekeeping introduced by the force of gravity are averaged out. In table clocks and wall-mounted clocks a tourbillon often serves a more decorative purpose. This is true of the Sky Watcher Tourbillon Table Clock from Ugears, where the sphere of the tourbillon has been styled to resemble a large telescope observatory scanning the celestial sphere, like those at Mauna Kea in Hawaii. Perhaps it is creating a map of the heavens? Conducting infrared studies? Or maybe searching for new planets or signs of intelligent life?\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe first prototype of the tourbillon was developed in 1795 by Abraham-Louis Breguet, who also succeeded in reducing the size of the mechanism and mounting it into a pocket watch. More than a century later, in 1920, the \"flying tourbillon\" was developed by Alfred Helwig, which opened the mechanism to view by having it mounted on only one side, endowing it with an aesthetic function. Today, there are many variations on the tourbillon mechanism, including single, double and triple axis designs, but what is common to all designs is that they are a daunting engineering challenge, such that a watch featuring a tourbillon will fetch a significantly higher price than models that lack the mechanism. The idea that you can build your own tourbillon out of composite wood, from a DIY model kit, without need of glue or special tools, is kind of amazing, but amazement is what our Ugears customers have come to expect.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Sky Watcher tourbillon mechanism has three axes of rotation: around the vertical axis of the clock, horizontal axis of the clock, and relative to the central axis of the inner sphere. The wind-up clock operates based on the accumulation of potential energy in a flat spring, and the metered release of this energy. When the model is fully wound it can power the timepiece for approximately 2-3 hours, sufficient for long observation of the mesmerizing mechanism, or to provide a pleasant background ticking clock sound and visual diversion for a period of work or rest. Rather than an all-too-common clock face with hands, we have created additional interest by having the time display placed on reels. The minute reel rotates smoothly with the progress of the tourbillon, while the hour reel marks the passage of time with a percussive mechanism.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMechanical adventure awaits when you order your Sky Watcher Tourbillon Table Clock, an exciting addition to the Ugears catalogue of 3D puzzles, DIY model kits, automatons, robots, wooden puzzle boxes and STEM Lab model kits. This model kit is definitely not for beginners, but will prove a delightful challenge for more experienced modellers. When assembling your Tourbillon Table Clock, the complexity of the mechanism must be taken into account. Remember, to keep accurate time, your clock requires lubrication and a neat, tidy assembly. Thanks to a balance wheel, the model allows for adjustments to its timekeeping whether the clock is running fast or slow, and of course you can set the current time on the display by turning the reels: minutes first, then hours. Your Sky Watcher clock comes with detailed, illustrated instructions in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Russian, Japan, Italian, Chinese and Korean). If you break a part during assembly, just let our customer service team know. Replacement parts are free, as part of our overall commitment to customer service.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Sky Watcher Tourbillon Table Clock from Ugears will make a handsome, fascinating addition to any home or office space. Large in conception and design, this remarkable tabletop clock is modest in size, with a tower design that won't take up much of your desk space. Even in its static state, this 3D puzzle clock is a beautiful addition to your decor and a sure-fire conversation piece. It's also a great gift idea. Give this DIY clock kit as a holiday or birthday gift to your favorite hobbyist and present them with a wonderful challenge, or if that hobbyist is you, build it as a magnificent display piece for your own mantle or home office. You could also present a completed Ugears 3D puzzle clock as a special gift to a loved one, giving them a unique, handcrafted piece of art and engineering in which you have invested your time and talents.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Sky Watcher Tourbillon Table Clock will appeal to night sky watchers, star gazers, amateur astronomers, horologists, clock and watch enthusiasts, experienced model builders, 17th C deists, Isaac Newton stans, and anyone who appreciates superior design or a DIY challenge.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"gt-description-block\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"row gt-description\" data-mce-fragment=\"1\"\u003eModel size: 30.5*18*16.5 cm\u003cbr\u003ePackage size: 37.8*17*4.5 cm\u003cbr\u003e\u003cbr\u003eNumber of components: 338\u003cbr\u003eEstimated time of assembly: 15 hours\u003cbr\u003eLevel: Advanced\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row gt-description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"row gt-description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"row gt-description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"row gt-description\" data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/Sky_watcher_Tourbillon_Table_Clock_assembly_instruction.pdf?v=1638985578\" target=\"_blank\"\u003ePDF instruction\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":40577648689361,"sku":"70162","price":89.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/products\/DSC3715.jpg?v=1638985022"},{"product_id":"pickup-lumberjack","title":"Pickup Lumberjack","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAssemble me. Take me home, country roads!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis old-timey truck sure is pretty to look at, but it's not just for show. The Ugears Pickup Lumberjack is a working truck with a job to do, and that's hauling wood (or hay bales, or work tools—whatever you can imagine)! Based on the popular 1959 Chevrolet 3100, the DIY wooden model features a 1m x 7mm spring motor (same as the powerful Ugears Drift Cobra) allowing the Pickup to travel up to 6 meters and haul loads of 400 - 450 g in the truck bed. The winding knob is stylized to resemble a custom open top air filter emerging from the hood. Lift the hood to reveal the beautiful V8 engine firing away!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Pickup Lumberjack has 3 modes: R (Reverse), N (Neutral), D (Forward). The spring's energy is transferred to a gear set to increase the gear ratio, through the gearbox, then to the drive shaft, differential, and rear axle. A Start\/Stop mechanism located in the truck bed allows you to start the truck on command. Because this is Ugears, and because we love to focus on the small, whimsical details that make a model exceptional, a small pendulum under the seats simulates the shaking of a truck's powerful engine. Bent plywood gives the model beautiful lines and 1950's styling. The Pickup's doors open from inside and outside, and the tailgate folds down. The front wheels can be turned using the steering wheel and locked in place for graceful turns. The Pickup Lumberjack also features front and rear spring suspension so you don't get bounced around too much on those country roads.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTake a journey back in time, into the woods, with the Pickup Lumberjack from Ugears. The sun is up. The mist has cleared, leaving drops of dew on the forest's carpet of moss and ferns. You've had a big breakfast of pancakes, eggs and bacon—what they call the \"lumberjack special\" at the diner in town. You're ready to work, and so is your dependable Chevy truck. You find the old logging road at the forest's edge and follow the twin tracks into the dark green heart of the woods. Your muscles are still sore from yesterday's labors, your shin is a bit banged up from where the log hit it, but your body is electric, craving physical labor. You are strong, confident and happy in a way that only people who work outdoors know.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou pull off the road, back the truck closer to the stand of beech trees and offload your gear. Birdsong and the whir of insects fills your ears. The humid aroma of plants, loamy earth, and the gasoline smell that hangs around the truck gladdens your heart. You check the oil in the saw. Good to go. Three strong pulls and it fires up. Before the sun is overhead the bed of your Pickup Lumberjack is stacked high with cut logs. You drive back the way you came, along the only road into these woods—the road you and your trusty truck know so well.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Pickup Lumberjack from Ugears is the newest addition to our outstanding collection of trucks, cars, motorbikes and other vehicles. The Pickup Lumberjack model kit has 460 pieces, is rated \"Advanced\" difficulty, and will provide 8+ hours of fun during assembly. If you love trucks, check out the Heavy Boy Truck VM-03 long hauler with Trailer, the vintage Truck UGM-11 with its set of additions, or the standalone Tanker or Fire Truck. Start your collection of wooden model trucks today, but don't stop there! The Ugears catalog of 3D puzzles, DIY model kits, automatons, robots, wooden puzzle boxes and STEM Lab model kits has all kinds of fascinating, ingenious, charming models for every taste or interest.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith Ugears mechanical models and 3D puzzles, the fun doesn't stop with the build. Your Pickup, with its engaging details, moving parts and spring motor, is meant to be played with and enjoyed, not just displayed. The Pickup Lumberjack wooden truck model is ready to assemble right out of the box—no special tools or glue required. Just follow the detailed, illustrated instructions in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Russian, Japan, Italian, Chinese and Korean) for a successful build. If you break a part during assembly, shoot us an email at \u003cstrong data-mce-fragment=\"1\"\u003ecustomerservice@ugearsmodels.com\u003c\/strong\u003e and we'll be glad to send you replacement parts at no additional cost. Have a question, or something not quite right with your build? You can find helpful tips and suggestions from our international family of Ugears builders on the Ugears Fan Club Facebook page, or just email us your question. We're proud to be known for outstanding customer service.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Pickup Lumberjack truck model hails back to a simpler time, before you needed a degree in computer science to fix your car or truck's engine. Dings and dents from work were what gave your truck character, not something to be embarrassed about when you drove to the shopping center. This old-timey working pickup truck model will make a handsome, retro addition to your home or office decor. It's also a great holiday or birthday gift idea for your favorite hobbyist or truck lover. Give a ready-to-assemble model kit or present a completed Ugears Pickup Lumberjack as a special handmade gift to a family member or friend, something in which you invested your time and talents.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Ugears Pickup Lumberjack will appeal to truck lovers (especially Chevy fans!), fans of retro automotive design and 1950's style, model building hobbyists, people who love to work with their hands, and anyone who appreciates outstanding design or a DIY challenge.\u003c\/p\u003e\n\u003cp\u003eModel size: 31.6*13.8*11.8 cm\u003cbr\u003ePackage size: 37.8*17*3,4 cm\u003cbr\u003e\u003cbr\u003eNumber of components: 460\u003cbr\u003eEstimated time of assembly: 8 hours\u003cbr\u003eLevel: Advanced\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/Pickup_Lamberjack_small.pdf?v=1657353435\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePDF Instruction\u003c\/a\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":41066633429201,"sku":"70171","price":73.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/products\/DSC6452.jpg?v=1657357277"},{"product_id":"winged-sports-coupe","title":"Winged Sports Coupe","description":"Assemble me. Fly down the road with style and speed!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eLet's talk cars. Because cars are cool, and the coolest of the cool might be the sports coupe: a sleek and stylish two-door car designed for high performance and driving enjoyment. Often built with a low, wide profile, sports coupes typically feature a powerful engine, sport-tuned suspension, aerodynamic design, and other performance-enhancing features that prioritize speed, agility, and handling. You don't buy a coupe for its fuel economy or trunk space, you buy it because a) you love to drive, b) you want to make a statement, and c) the cool factor. And nothing is cooler on a car, or makes a bigger statement than gull-wing doors!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnyone who's seen the movie \"Back to the Future\" remembers the iconic gull-wing doors car that served as Marty McFly's time machine. Gull-wing doors are head-turners, they are spectacle, they are automotive grace and style, nature turned into steel. First introduced in the 1950s gull-wings are hinged at the roofline and open upwards, creating a larger opening than traditional doors for easy entry and egress.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Ugears Winged Sports Coupe lets you dream the dream without breaking the bank. The third car in the Dual Motors collection, this graceful 1: 24 scale model coupe has 2 modes of operation: wind the car with the ratchet key located under the detachable chassis, or pull the car back along a flat surface and release. The car also features a hood that lifts to reveal a model engine. Made of art-quality composite wood parts that you punch out of laser pre-cut boards, the toy car has a wonderful natural wood aroma and natural wood feel. As with all Ugears models, we recommend sanding off any burs on the composite wood pieces, waxing and \"developing\" the moving parts once they are assembled by operating until gears and other moving parts run smoothly. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Winged Sports Coupe DIY mini auto kit has 265 parts and is rated \"Medium\" difficulty level. Everything you need for assembly comes right in the box, including sandpaper, wax, and illustrated step-by-step instructions in 11 languages (English, Ukrainian, German, Spanish, French, Italian, Portuguese, Polish, Japanese, Chinese, and Korean). This mechanical model promises 4+ hours of enjoyable build time, after which you get to pull up on your friends and family, pop the gull-wing doors, and watch their reactions! Be sure to check out the other Dual Motors models from Ugears: the Hot Rod Furious Mouse and the Sports Car Rapid Mouse. From there the entire catalogue of Ugears mechanical marvels, including cars, trucks, motorbikes, automatons, robots, wooden puzzle boxes and STEM Lab model kits awaits your discovery!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOrder your DIY Ugears Winged Sports Coupe today and get ready to fly down the road in grace and style!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eModel size: 24.1*11.6*10.5 cm\u003cbr data-mce-fragment=\"1\"\u003ePackage size: 37.3*17*3.5 cm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNumber of components: 262\u003cbr data-mce-fragment=\"1\"\u003eEstimated time for assembly: 4 hours \u003cbr data-mce-fragment=\"1\"\u003eLevel: Easy\u003cbr data-mce-fragment=\"1\"\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":47032845173075,"sku":"70205","price":38.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_4188.jpg?v=1693823965"},{"product_id":"nasa-space-shuttle-discovery","title":"NASA Space Shuttle Discovery","description":"\u003cp\u003eAssemble me. Take a journey to space with me!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Space Shuttle Discovery was the third of five reusable NASA orbiters, logging 39 launches and landings between 1984 and 2011—the most flights of any spacecraft in history. Perhaps its greatest accomplishment was the April 25, 1990 deployment of the Hubble Space Telescope (\"HST\") which revolutionized astronomy and astrophysics, particularly our understanding of the age and expansion of the universe. With characteristics of a rocket (for vertical launch) and a glider aircraft (for landings), space shuttles were the workhorses of America's space program at the turn of the 21st Century, and were critical to the construction and maintenance of the ISS (International Space Station).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNow you can build this iconic orbiter and imagine yourself a participant in its signature mission to further the work of exploration and scientific discovery in launching the Hubble telescope. Ugears' NASA Space Shuttle Discovery model is actually a remarkable three-in-one: orbiter, stand and satellite. The Shuttle is a 1:96 scale model of Discovery, with two cargo bays that open to reveal the HST model, which features movable solar panels and aperture door. The Shuttle's front and rear bays open independently, for storing or launching the telescope. To open the front cargo bay, turn the wheel near the cabin in the direction of the arrow marked \"Open.\" A similar wheel on the tail section opens and closes the rear cargo bay. Place the telescope on the Shuttle's robotic arm for deployment, and spin the arm using a dial located on the belly of the orbiter.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Shuttle's stand employs tensegrity (tensional integrity or floating compression), an elegant structural engineering design that allows the model to hover above the stand on thin fishing lines, as if floating free in space. A ratchet mechanism on the stand allows you to adjust the tension of the lines. You can change the pitch of the spacecraft up and down by hand, simply by pulling on the tension lines, or adjust the roll of the spacecraft left and right either by moving the stand by hand or using the stand's ratchet dial. Other functional elements of the Shuttle model include movable ailerons on the orbiter's wings, movable tail rudder, and retractable landing gear.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eYour Discovery Shuttle comes with an informational plaque giving important facts about Discovery, and with permission from the National Aeronautics and Space Administration, the kit includes stickers with the orbiter's name, NASA \"worm\" logo and USA flag to place on the wings and side of the orbiter, to complete the authentic look.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe NASA Space Shuttle Discovery three-in-one DIY model is rated \"Advanced\" level, for experienced builders, and is sure to take pride of place on a shelf or table in your living room, bedroom or office. Like all Ugears wooden models and 3D puzzles, Discovery and all its components assemble without glue, and can be built without special tools, following the step-by-step, illustrated instructions in 11 languages (English, Ukrainian, German, Spanish, French, Italian, Portuguese, Polish, Japanese, Chinese, and Korean). Don't worry if you break a piece while building your 3D puzzle. Just let our customer service team know and we'll be glad to provide replacement parts free of charge.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis smart, sophisticated model of a NASA Space Shuttle will delight anyone who dreams of distant voyages, space exploration, or advancing scientific knowledge. The three-in-one NASA Space Shuttle Discovery with Hubble telescope and tensegrity stand will make a perfect gift for any friends and family who love aviation and spacecraft history, or for modeling hobbyists who want to add a real showpiece to their collection. Take a voyage to the stars with Ugears!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eModel size: 33.5*22.5*29 cm\u003cbr data-mce-fragment=\"1\"\u003ePackage size: 37.3*17*5 cm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNumber of components: 315\u003cbr data-mce-fragment=\"1\"\u003eEstimated time for assembly: 6 hours \u003cbr data-mce-fragment=\"1\"\u003eLevel: Medium\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":47032933515603,"sku":"70227","price":57.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_6796.jpg?v=1693826256"},{"product_id":"engine-clock","title":"Engine Clock","description":"Assemble me. Rev up your day!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhat do they say about a finely-tuned motor—it runs like clockwork? Flip the script with the Ugears Engine Clock, a finely-tuned clock that runs (and looks) like a motor! This functional mechanical table clock with pendulum has an automotive theme throughout, with an engine block design on top with moving pistons, and time display in the style of a speedometer (hours) and tachometer (minutes). The action of the clock's pendulum and escapement make a delightful ticking sound, as the passing seconds are displayed on the escapement at the rear of the clock. The Engine Clock tells time for up to 5 hours on a single winding (running time can be extended an additional 60 to 90 minutes if the pistons are disengaged). A retrograde mechanism on the minute hand automatically resets after 60 minutes.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWind your Engine Clock using the ignition key at the front of the clock. To set the time, turn the large gear closest to the face of the clock (the retrograde mechanism) in a clockwise direction until the minute hand falls to zero, then use your finger to move the hour hand counterclockwise, positioning it at the current hour. Set the minute hand at the current time by again turning the large gear just behind the clockface. If the clock is running fast or slow you can make adjustments to the pendulum. Raise or lower the circular weight at the bottom of the pendulum for larger time adjustments, and raise or lower the ball at the top the pendulum for fine-tuning.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe DIY wooden Engine Clock is the latest addition to the Ugears collection of working clocks, including the Aero Clock wall clock with pendulum, and the Sky Watcher Tourbillon Table Clock. While those models are both \"Advanced\" level, with the Engine Clock we strove to design a functional clock at the \"Medium\" difficulty level, so that more hobbyists could experience the satisfaction of building their own functional DIY 3D model clock. As with all Ugears models, the Engine Clock is assembled without glue or special tools—just remove the laser pre-cut pieces from their art-quality composite wood boards and snap them together. Each kit comes with detailed, step-by-step, full-color illustrated instructions in 11 languages (Ukrainian, English, German, French, Polish, Spanish, Portuguese, Turkish, Italian, Chinese and Korean) to guide your assembly, and sandpaper and wax to smooth and lubricate all moving parts for optimal function. If you get stuck during the assembly, need help troubleshooting, or break a piece during construction, just email our outstanding customer service team—we'll be glad to answer any questions or send replacement parts free of charge!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe elegant Engine Clock by Ugears is sure to rev up any motorheads and lovers of clocks and watches among your family and friends, and makes a perfect gift, either in the box or already assembled. For all you builders, tinkerers, and mechanics, it's time to experience the satisfaction of constructing, adjusting and maintaining your very own DIY automotive timepiece!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eModel size: 14.2*30*12 cm\u003cbr data-mce-fragment=\"1\"\u003ePackage size: 37.3*17*5 cm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNumber of components: 265\u003cbr data-mce-fragment=\"1\"\u003eEstimated time for assembly: 5 hours \u003cbr data-mce-fragment=\"1\"\u003eLevel: Medium\u003cbr data-mce-fragment=\"1\"\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":47037860315475,"sku":"70217","price":62.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_0091.jpg?v=1693908071"},{"product_id":"quidditch™-pinball","title":"Quidditch™ Pinball","description":"\u003cp\u003eAssemble me. Catch the Snitch™!\u003c\/p\u003e\n\u003cp\u003eHop on your broomsticks and get ready to play an exciting game of Quidditch™ Pinball, the newest model in the Ugears Harry Potter™ collection. This working pinball game is based on the fictional wizarding game of Quidditch™ from the beloved series of Harry Potter books and movies, where players fly around an aerial arena while trying to throw or hit the Quaffle™ through three rings on their opponents' side of the field, scoring ten points each time they do. Any team catching the Golden Snitch™ scores 150 points and wins the game.\u003c\/p\u003e\n\u003cp\u003eThe DIY Ugears Quidditch™ Pinball model is a visually-stunning stadium, comprising a playing field made of cardboard printed with decorative elements, 8 elevated viewing platforms engraved with the logos of the four houses of Hogwarts™ (Gryffindor™, Hufflepuff™, Ravenclaw™ and Sytherin™), functional scoreboard, a chest for storing the Golden Snitch™ and three Quaffle™ balls, and functional pinball game elements including flippers, bumpers, targets and obstacles.\u003c\/p\u003e\n\u003cp\u003ePrepare your Ugears Quidditch™ Pinball game by first making sure the model is assembled correctly and all moving parts work properly. Place the model on a flat surface then retrieve the yellow ball (Snitch™) from the chest and place it on its reserved spot on the left rail. Insert the three red balls (Quaffles™) into the hole on the left front of the model. Raise the three targets in the center of the field by pressing on the two bumpers and the launch ramp immediately behind the targets. Twist the dial on the back of the scoreboard to set it to three zeros and you're ready to play!\u003c\/p\u003e\n\u003cp\u003eTo play the game, press in the \"New Game\" sign on the front of the model, sending the three Quaffles™ toward the trigger. Press down the ball lift lever on the front right to raise the first Quaffle into the ready position, then pull the side trigger back and release sharply, launching the ball onto the playing field. Place your hands on the flipper buttons located on the left and right sides of the game, pressing these to keep each ball in play for as long as you can. Knock down the three targets to create a clear path to the rings, defended by a toggling Keeper (Ron Weasley) and two Beaters (the Weasley twins—Fred and George). Each time a Quaffle™ passes through a ring on the far side of the field you score ten points (press the button on the top right of the scoreboard to keep a running tally of points) and the Quaffle™ returns to be sent back into play. Defend your own three rings by not letting the Quaffles™ get past your flippers, or they'll drop out of play. Once all three Quaffles™ have dropped through your own rings the game is over.\u003c\/p\u003e\n\u003cp\u003eThe greatest challenge of the game, and the surest way to win, is to catch the Snitch. This can be done by sending a Quaffle™ up onto the rails, by launching it off the inclined center ramp (the ramp raises into position once the center target is hit). If a Quaffle™ lands on the right rail it will be conducted back into play, while a Quaffle™ landing on the left rail will ride down until it releases the Snitch into the waiting arms of Harry Potter™. Congratulations, you have won! Press the button on the top left of the scoreboard to raise a banner awarding 150 points and proclaiming your victory! \u003c\/p\u003e\n\u003cp\u003eThis \"Advanced\" level model with 402 pieces is meant for experienced modelers or those up for a challenge, and promises 9+ hours of exciting build time. Everything you need to assemble and play your DIY Quidditch™ Pinball game comes in the box—no additional tools or parts required. The pieces of your 3D puzzle pinball game are carefully laser pre-cut into high quality plywood boards. Take care when assembling to punch the composite wood pieces out of the boards with the helper tool, then snap them together—no glue needed! Sand and wax all moving parts for optimal function. Illustrated, step-by-step instructions in 11 languages (English, Ukrainian, German, Spanish, French, Italian, Portuguese, Polish, Japanese, Chinese, and Korean) are provided to guide your assembly. If you break a piece during construction let us know and we'll be glad to provide replacement parts for your Quidditch Pinball puzzle free of charge. If the rubber band elements and silicone bumpers ever wear out these can be easily removed and replaced, as the model has been designed with maintenance in mind.\u003c\/p\u003e\n\u003cp\u003eThe attention to detail on the Ugears Quidditch™ Pinball game make this a coveted \"must-have\" model for Potterheads, hobbyists and game enthusiasts. Check out the flipper buttons styled as Quaffles™, the bumpers styled as Beater bats, the decorative strip lining the field emblazoned with logos of the Hogwarts™ houses, the illustrated panel on back of the scoreboard, the wooden chest and scoreboard styled to resemble those depicted in the film \"Harry Potter and the Philosopher's Stone,\" and the laser-engraved figures of Harry, Ron and the Weasley twins riding their brooms. This functional DIY wooden mechanical pinball game is both a fun toy and stunning display piece, an outstanding new entrant in the Ugears Harry Potter™ collection, and the first model in Ugears' new game series. Now, let's have a nice, clean game of Quidditch™ Pinball!\u003c\/p\u003e\n\u003cp\u003eModel size: 42.5*18.5*29.5 cm\u003cbr\u003ePackage size:  37.8*17*5 cm\u003c\/p\u003e\n\u003cp\u003eNumber of components: 402\u003cbr\u003eEstimated time for assembly: 9 hours  \u003cbr\u003eLeve: Advanced\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":49411095724371,"sku":"70231","price":89.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_6524.jpg?v=1726508168"},{"product_id":"hogwarts™-castle","title":"Hogwarts™ Castle","description":"\u003cp\u003eAssemble me. Welcome to the school for witches and wizards!\u003c\/p\u003e\n\u003cp\u003eImagine you're a young witch or wizard, just stepping off the Hogwarts Express onto the platform at Hogsmeade Station, nervous to start your first term at the Hogwarts School of Witchcraft and Wizardry. A bearded giant is barking out orders for the first years to line up, and as you gaze around, taking it all in, one of your classmates points and shouts, \"There it is—Hogwarts!\" In the distance, set high on a hill, you see the imposing stone towers and turrets of Hogwarts Castle. It's everything you've dreamed of and dreaded at the same time. You gulp as you see a dragon hanging off the main tower—is it someone's pet or an emissary from He-Who-Must-Not-Be-Named? This is going to be an interesting year, to say the least!\u003c\/p\u003e\n\u003cp\u003eEnter a magical world as you build the majestic Hogwarts™ Castle from Ugears, a faithful recreation of the wizarding school as seen in the Harry Potter™ series of films. With its riot of towers and turrets, this static model with movable elements (including staircase and dragon's wings) will transport you to a place of intrigue and spells. The Hogwarts™ Castle, presented under special license from Warner Brothers, instantly becomes a classic in the Ugears collection of Harry Potter™ wooden DIY models, joining the Hogwarts Express™, Platform 9 ¾™, Quidditch™ Pinball, Knight Bus™, Flying Ford Anglia™, and Hagrid's Flying Motorbike™ with Sidecar. \u003c\/p\u003e\n\u003cp\u003eThe front of the model presents the buildings, towers, turrets and parapets of the Hogwarts school of Witchcraft and Wizardry in detail, including finials, cloisters, cutout windows and laser engraving that replicates the look of rocks, stonework, and slate tiles on the roofs. The back of the model features a cutaway of the castle for a more compact design, allowing it to be placed flush against a wall, and showing hidden interior details like the Great Hall, tower staircase, rooms and interior courtyards. Hanging off the side of the main tower is a dragon with movable wings, recalling the scene in the film \"Harry Potter and the Goblet of Fire\" where Harry is pursued by a fire-breathing dragon.\u003c\/p\u003e\n\u003cp\u003eThe model is recommended for ages 14+, and is rated \"Medium\" difficulty level with 340 parts and an estimated assembly time of 6 hours. Parts are laser pre-cut into art-quality composite wooden boards. To assemble, simply remove the pieces from the boards and snap them together following the detailed, illustrated instructions available in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Portuguese, Japanese, Italian, Chinese and Korean). No glue or special tools are required to build your Hogwarts™ Castle—everything you need for assembly is included in the box.\u003c\/p\u003e\n\u003cp\u003eUgears' outstanding collection of mechanical 3D puzzles, DIY model kits, automatons, robots, wooden puzzle boxes and STEM Lab model kits are enjoyed by experienced model hobbyists and beginning builders the world over. If you need help during assembly, or accidentally break one of the pieces during assembly just send an email to our outstanding customer service team at customerservice@ugearsmodels.com and we'll be glad to send you replacement parts at no additional cost, as part of our commitment to customer service.\u003c\/p\u003e\n\u003cp\u003eThis stunning 3D puzzle of Hogwarts™ Castle is sure to delight anyone who has read the Harry Potter series of books or seen the films. Building models is a great way to immerse yourself for hours in the world of Harry Potter, and when you're done you have an impressive display piece for a desk or shelf in your child's bedroom. The Hogwarts™ Castle model is a great gift idea for parents wanting to reward their children for reading one or more of the Harry Potter books, and a fun craft project to build as a family. Take your young wizard or witch on a magical adventure to Hogwarts when you build the Hogwarts™ Castle from Ugears!\u003c\/p\u003e\n\u003cp\u003eModel size: 36.9 x 27.3 x 11.7 cm\u003cbr\u003ePackage size: 37.3 x 17 x 5 cm\u003c\/p\u003e\n\u003cp\u003eNumber of components: 340\u003cbr\u003eEstimated time of assembly: 6 hours       \u003cbr\u003eLevel: Medium\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":49420081561939,"sku":"70256","price":57.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_5984.jpg?v=1726598979"},{"product_id":"nasa-saturn-v","title":"NASA Saturn V","description":"\u003cp\u003eAssemble me. Explore the iconic rocket!\u003c\/p\u003e\n\u003cp\u003eNASA's Saturn V rocket holds records as the tallest, most powerful, and heaviest payload launch vehicle ever built, and is the only rocket to have carried humans beyond low Earth orbit. There were thirteen successful missions using Saturn V rockets: the twelve Apollo missions and the launch of Skylab (the United States' first space station) into low Earth orbit. The Saturn V stood 363 feet (110.64 m) tall (taller than the Statue of Liberty), was 33 feet (10.06 m) in diameter, weighed 6.5 million pounds (2.95 million kg) when fully fueled, and had three separate stages that fired sequentially and separated in flight. Stages one and two had five engines each, stage three had one engine, and all three stages used liquid fuel (the first used RP-1, while stages 2 and 3 used liquid hydrogen) mixed with liquid oxygen (LOX) as the oxidizer.\u003c\/p\u003e\n\u003cp\u003eUgears' Saturn V model is a 1:170 scale wooden model of the greatest rocket the world has seen. It joins the NASA Space Shuttle Discovery, Manned Mars Rover and Mars Rover in the Ugears collection of space exploration vehicles. The model comes with a three-part display stand that allows you to display the model vertically or horizontally, either joined or in separate stages. Each stage has attractive cardboard overlays with \"United States\" or \"USA\" and American flag details, with removable panels that allow you to see the internal structure, including labeled fuel and oxidizer tanks. A display card on the stand highlights important facts and details about the Saturn V rocket.\u003c\/p\u003e\n\u003cp\u003eThis highly accurate DIY Saturn V rocket model has three stages that can be separated by pressing buttons on the sides of the rocket's body, as well as detachable interstage rings. Concealed within the third stage is the LM (lunar module) with folding legs. As with the actual Apollo missions, the LM can dock with the detachable CM (command module) that sits atop the third stage, just below the LES (launch escape system).\u003c\/p\u003e\n\u003cp\u003eThe Ugears NASA Saturn V three-stage rocket is rated \"Advanced\" level, for experienced builders, and makes a majestic display piece for your living room, bedroom or office. Like all Ugears wooden models and 3D puzzles, the Saturn V and all its component parts assemble without glue, and can be built without special tools, following the step-by-step, illustrated instructions in 11 languages (English, Ukrainian, German, Spanish, French, Italian, Portuguese, Polish, Japanese, Chinese, and Korean). Made from art-quality composite wood, Ugears models can be left in their attractive natural wood state, or colored, stained or painted in a color scheme of your choosing (paints not included). The Saturn V kit includes several spare parts in case of breakage during assembly, and you can always contact our customer service team for additional replacement parts, free of charge (including shipping). We can also answer questions or help troubleshoot if you encounter any difficulties during your build.\u003c\/p\u003e\n\u003cp\u003eThis impressive DIY scale model of the greatest rocket the world has known instantly becomes a treasured part of the Ugears NASA collection and the larger catalogue of Ugears 3D puzzles, DIY model kits, automatons, robots, wooden puzzle boxes and STEM Lab model kits. It will be coveted by anyone whose imagination was captured by the Apollo missions, by students of aviation history, space exploration enthusiasts, or by modeling hobbyists who want to add an outstanding showpiece to their collection. Can you imagine a better way to help children become rocket scientists (in the literal or figurative sense) than by helping them build an amazing scale model of the Saturn V, and letting them play and interact with the various stages and modules? Start the countdown to modeling adventure—T-minus 10…9…8…and blast off with Ugears!\u003c\/p\u003e\n\u003cp\u003eModel size: 10 x 66.5 x 14.6 cm\u003cbr\u003ePackage size:  37.3 x 17 x 5 cm\u003c\/p\u003e\n\u003cp\u003eNumber of components: 500\u003cbr\u003eEstimated time of assembly: 7 hours \u003cbr\u003eLevel: Advanced\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":49420545229139,"sku":"70257","price":78.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_6196.jpg?v=1726601453"},{"product_id":"book-of-secrets","title":"Book of Secrets","description":"\u003cp\u003eAssemble me. Discover my secret before entrusting me with yours!\u003c\/p\u003e\n\u003cp\u003eLock your secret notes, precious treasures, or other personal items inside the Book of Secrets from Ugears and keep them safe from curious eyes. This beautiful 3D wooden puzzle is a steampunk combination-lock box, styled as a book, has a secret compartment, a multi-step opening sequence, and fascinating mechanical action. Your Book of Secrets opens by entering a three-digit combination on the book's spine to release the secret key. Insert the key in the special slot and turn counterclockwise to engage the opening mechanism, then turn the gears counterclockwise to finally open the book. Various windows on the box tell you whether you have completed each step correctly. This secret 3D mechanical box with its complex opening sequence has many mysteries and is both a fun way to store your things and a fun game to play with friends or family as you challenge them to discover the Book of Secret's hidden features. For the first time in Ugears history, we used two colors of plywood (dark and light) to make this model even more special for you.\u003cbr\u003eBooks have been used to hide items, in real life and in fiction, for almost as long as there have been books. Homeowners can conceal valuables from burglars by hollowing out a book and placing it on a bookshelf with other tomes. The secret book is easily found by the homeowner, but nearly impossible to find for the crook. In \"The Matrix,\" Neo hides computer discs and cash inside a book, and who can forget the prison breakout in \"Shawshank Redemption,\" accomplished using a rock hammer concealed in a Bible, the pages cut out starting at \"Exodus.\" Everyone loves puzzles and riddles and this Secret Book from Ugears is just that—a big riddle with a series of puzzles that must be solved to open the secret compartment and see what's inside!\u003cbr\u003eYou can set any three-digit combination you want on your Ugears Book of Secrets by removing the pin block inside the secret compartment. Turn the dials to the combination you want and reinsert the pin block. The key release mechanism will now work with the combination you have set. When you press the lever under the bottom of the book's spine the key will pop out of its slot at the top of the spine. The lever will not eject the key if the three tumblers are set to any other number sequence. You can reset the three-digit combination any time you like by following the same sequence—open the 3D wooden box, remove the pin block, reset the combination, reinsert the pin block, and the key release mechanism is now set to the new combination.\u003cbr\u003eDid you forget the combination? Oh no, now what? Don't worry, our designers and engineers have you covered. There are two different ways to access the contents of the box without the combination. You can open the Book of Secrets by simply prising off the back panel— insert a flat tool like a screwdriver or metal ruler into the slot between the back panel and the box, then gently jimmy the panel in several places to lift and remove the panel, giving you access to the box. You can also play safe cracker, discovering the combination through touch. Press the key release lever with your finger, holding it in with slight pressure, then rotate each tumbler sequentially. You'll feel that the correct number on each tumbler turns slightly tighter than the others, and that the lever slightly shifts under your finger as the correct number clicks into place. When the last drum is set to the correct number the indicator on the spine changes from closed to open—the key release is now engaged.\u003cbr\u003eLike all Ugears 3d wooden puzzles for adults and kids, the DIY Book of Secrets mechanical DIY model can be built without glue or any need for additional tools. Just snap the pieces together following the comprehensive, illustrated step-by-step instruction manual in  English, Ukrainian, German, Spanish, French, Italian, Portuguese, Polish, Japanese, Chinese, and Korean. Everything you need for assembly comes right in the model kit, including a piece of sandpaper you can use to smooth any burrs off the wooden pieces, and a piece of wax to lubricate moving parts.\u003cbr\u003eUgears has an entire collection of beautiful 3D puzzle boxes for storing and organizing your personal things. The Amber Box has natural, semi-precious gemstones on the lid, the Antique Box expands as it opens to reveal six compartments (plus two small secret chests), while the Treasure Box has a key hidden in the lid and a secret keyhole on the side. The Ugears Safe model, like the Book of Secrets, can be locked and opened with a three-digit combination of your choosing. Choose the puzzle box that fits your personality, or build them all and give them as unique gifts to your friends and loved ones. \u003c\/p\u003e\n\u003cp\u003eModel size: 17 x 18.7 x 7 cm\u003cbr\u003ePackage size: 37.3 x 17 x 5 cm\u003c\/p\u003e\n\u003cp\u003eNumber of components: 263\u003cbr\u003eEstimated time of assembly: 6 hours      \u003cbr\u003eLevel: Medium\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":49424162652499,"sku":"70265","price":68.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_2191.jpg?v=1726665001"},{"product_id":"lighthouse-of-alexandria","title":"Lighthouse of Alexandria","description":"\u003cp\u003e\u003cstrong\u003eAssemble me. Build one of the Seven Wonders of the Ancient World!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBring history to light when you build the Lighthouse of Alexandria from Ugears! This majestic wooden model lighthouse is an imaginative recreation of one of the Seven Wonders of the Ancient World—the giant lighthouse built by Ptolemy I and Ptolemy II in the third century BCE at the western edge of the Nile River delta in Egypt. In a first for Ugears, the Lighthouse of Alexandria has electrical components that light the model from within, making it a beautiful, warm, functional nightlight.\u003c\/p\u003e\n\u003cp\u003eBuilt of solid blocks of stone, and towering over 100 m high, the Lighthouse of Alexandria was one of the tallest man-made structures in the world. It survived more than a thousand years until a series of earthquakes, the last in 1303, caused it to tumble into the sea. Remnants of the great lighthouse, including granite blocks, columns and statues, were rediscovered on the floor of Alexandria's harbor in 1968 and can still be seen by divers today.\u003cbr\u003eThe DIY wooden model Lighthouse of Alexandria by Ugears is based in large part on the surviving historical record, making this a fascinating assembly-ready replica. As the Lighthouse of Alexandria was dedicated to Zeus, our model is topped by an engraved cutout of the king of the gods, clutching a thunderbolt. Parapets, towers, catwalk and a cupola add architectural interest throughout, with laser engraving that replicates the look of stone blocks and shingles. Because it's Ugears, this static model also has a moving component: gates in the base at both front and rear that open with turning knobs.\u003cbr\u003eCrafted from art-quality 3mm composite wood, the model also incorporates electrical components, bulbs and an acrylic lens. Powered either by USB-C (via phone charging) or three AA batteries, with a charging port and on\/off switch at the rear of the base, your model lighthouse is warmly lit from within by two LED lights—one at the top illuminating a flame cutout behind the lens, and one inside the main tower illuminating the tower's latticework—making the Lighthouse of Alexandria not just an architectural wonder but also a cozy nightlight. At just over a foot in height (31 cm), your wooden model Lighthouse of Alexandria is the ideal size for a nightstand.\u003cbr\u003eThe ancient Lighthouse of Alexandria is a DIY model at the intermediate (Medium) level, with 340 parts, promising more than six hours of engaging build time. The kit includes natural composite wood parts in laser pre-cut boards, electrical components, 2 LED lights, acrylic lighthouse lens, plus a piece of sandpaper and wax for smoothing and lubricating the pieces. As with all Ugears models, you won't need glue or special tools to assemble your model Lighthouse of Alexandria. Just snap the pieces together, following step-by-step instructions in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Portuguese, Japanese, Italian, Chinese and Korean). Then sit back and admire your architectural creation, and the warm glow it gives any room!\u003cbr\u003eThis Wonder of the Ancient World wooden model of the great Lighthouse of Alexandria will appeal to builders and hobbyists, architecture enthusiasts, students of history, and anyone wanting a showpiece nightlight to grace a nightstand, tabletop, or shelf in their home. You can leave the model in its attractive natural wood state or paint or stain it to add even greater realism. Give the boxed kit as a gift or build it yourself and present the finished Lighthouse to a dear friend or family member as a unique gift in which you've invested your time and talents. Let your light shine when you build the fascinating Lighthouse of Alexandria from Ugears!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eModel size: 15.7 x 31 x 15.7 cm\u003cbr\u003ePackage size: 37.3 x 17 x 5 cm\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNumber of components: 340\u003cbr\u003eEstimated time of assembly: 6 hours\u003cbr\u003eLevel: Medium\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":50779196358995,"sku":"70254","price":73.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/32-1024x576.webp?v=1744830683"},{"product_id":"v8-engine","title":"V8 Engine","description":"\u003cp\u003e\u003cstrong\u003eAssemble me. Fire up your passion for mechanics!\u003c\/strong\u003e\u003cbr\u003e  \u003cbr\u003eV8 engines, with their signature roar, are synonymous with automotive power. Thanks to the balanced arrangement of two banks of four cylinders in a V configuration, V8 engines produce less vibration than six cylinder engines, allowing for a larger engine with greater horsepower. Patented in 1902 by French engineer Léon Levavasseur, the V8 is most widely known for providing the muscle in muscle cars, but did you know V8 engines were first used extensively in powerboats, and have even been used in airplanes and motorbikes? Motorheads and modeling enthusiasts have been asking us for years for a complex engine model, and here it is: the Ugears V8 Engine!\u003cbr\u003eThe V8 Engine is a 1:6 scale model that operates using either an electric motor or by turning a knob, allowing you to watch the mesmerizing workings of this iconic internal combustion engine. The model fully replicates all main mechanisms in a real V8, including eight cylinders with pistons moving in cycle, with two cylinders \"firing\" for every 90 degrees of crankshaft rotation, 16 spring-loaded valves opening and closing as they are pushed by heads on the rotating camshafts, crankcase and valve train components linked with a timing chain, and a throttle valve on the intake manifold. The model is powered by an electric motor styled as a generator. A serpentine belt connects the crankshaft pulley to various pulleys representing engine accessories like the A\/C compressor, alternator, power steering pump and water pump. Connect the model to a power source using a USB-C cable, then flip the on\/off switch to \"on\" to watch your engine come to life, or manually set the V-8 engine in motion by twisting the knob located under the on\/off switch.\u003cbr\u003eOther amazingly realistic details include stylized exhaust manifolds, spark plugs, oil pan, dipstick, and caps on top for oil and brake fluid. The model is assembled in stages—first the cylinder block, then the valve blocks, allowing you to better understand the workings of the engine. The rubber band on the front of the engine can be replaced easily, while the throttle rubber band can also be replaced by removing the intake manifold. The timing chain has 32 links, and its tension can be adjusted using two tensioners, ensuring that the chain is not too loose or too tight.\u003cbr\u003eThe Ugears V8 Engine is an Advanced level build, intended for experienced modelers. Your efforts will be rewarded with a deeper understanding of the workings of an internal combustion engine as you build and operate this highly realistic wooden model engine. This intricate 3D puzzle engine can be assembled without glue or special tools, following the step-by-step, illustrated instructions in 11 languages (English, Ukrainian, German, Spanish, French, Italian, Portuguese, Polish, Japanese, Chinese, and Korean). Parts are made from art-quality composite wood and are punched out of laser pre-cut boards. Be sure to carefully sand and lubricate all moving parts with the included piece of sandpaper and wax (or other lubricant of your choosing) for optimal engine function.\u003c\/p\u003e\n\u003cp\u003eYou can leave the model in its attractive natural wood state, or color it with paint or stain, perhaps assigning different colors to different manifolds and components (paints not included). There are 776 parts in your V8 Engine kit, and we've included 25 spare parts as backups. If you break unique parts during assembly just contact our customer service team for replacement parts, free of charge (including shipping). We're also happy to answer your questions or help with troubleshooting if you get stuck during your build.\u003c\/p\u003e\n\u003cp\u003eThis one's for all you gearheads, motorheads, pistonheads, petrolheads, grease monkeys and car-nnoissers. You asked for a sophisticated wooden engine model and we delivered. The V8 Engine from Ugears is a bit of a brag–from us to our customers in when we designed it, and from you to your friends and family when you build it. The thing is, we get you. We share your love of all things mechanical. Our team is made up of people who simply have to know how things work, and we want to help others learn too. Inspire the next generation of engineers and mechanics when you give the V8 Engine as a gift to a young modeler, or when you take it down from a shelf in your home, garage or shop and show it to a curious child, grandchild or neighbor or let them play with it. Put the vroom in your room with the V8 Engine from Ugears!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eModel size: 16.1 x 12.1 x 15 cm\u003cbr\u003ePackage size: 37.3 x 17 x 5 cm\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNumber of components: 776\u003cbr\u003eEstimated time of assembly: 8 hours    \u003cbr\u003eLevel: Advanced\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":50797442203987,"sku":"70264","price":94.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/31-1024x576.webp?v=1744831203"},{"product_id":"ugt-24-endurance-racer","title":"UGT-24 Endurance Racer","description":"\u003cp\u003e\u003cstrong\u003eAssemble me. Relive the golden age of racing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInspired by legendary race cars from the 1960s, the UGT-24 Endurance Racer is a motorhead's and model hobbyist's dream. This 1:12 scale 2-door sports coupe, similar to the Ugears Dream Cabriolet in its dimensions, functionality, and attention to detail, will set your heart racing with opening front and back hoods, full suspension, silicone rubber tires for extra road grip, color racing stripe and windows (both firsts for Ugears!) and V8 engine with moving pistons. Relive the glory days of 60's era endurance racing with this best-in-class coupe!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWind up your Endurance Racer by removing the key stored in the boot and inserting it into the ratchet mechanism under the chassis. Set the car on the floor and flip the Stop\/Start switch, or place the car in Neutral to observe the moving pistons. The functional shifter also has Forward and Reverse gears, with an extra burst of speed using Sport mode. Movable parts on this wooden model racer include the radiator fan, handbrake, fuel caps, and locking doors. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUGT-24 Endurance Racer features:\u003c\/strong\u003e\u003cbr\u003e1:12 scale two-door sports coupe model\u003cbr\u003eFunctional shifter with Forward, Sport, Neutral and Reverse gears\u003cbr\u003eMulti-link spring suspension on all four wheels\u003cbr\u003eSpring motor with winding key\u003cbr\u003eHood and boot open, handbrake and windshield wiper move\u003cbr\u003eRemovable spoiler\u003cbr\u003eMoving V-8 engine pistons and radiator fan\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStylish Race Car Features:\u003c\/strong\u003e\u003cbr\u003eFunctional steering wheel\u003cbr\u003eAerodynamic design, loaded with realistic details\u003cbr\u003eBlue racing stripe and plastic windows \u003cbr\u003eAssembles without glue or tools\u003cbr\u003eStep-by-step instructions in 11 languages\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":50797489062227,"sku":"70267","price":157.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_9295.jpg?v=1744832912"},{"product_id":"split-rock-lighthouse","title":"Split Rock Lighthouse","description":"\u003cp\u003e\u003cstrong\u003eSplit Rock Lighthouse\u003c\/strong\u003e\u003cbr\u003eAssemble me. Let the guiding light brighten your nights!\u003cbr\u003e\u003cbr\u003eWhen skies darken and the gales of November whip up 20-foot waves on Lake Superior, Kitchi-gami (\"Big Sea\" in the native Ojibwe language) becomes one of the most dangerous bodies of water in the world. Ships must find safe harbor or find the bottom. \"The lake, it is said, never gives up her dead,\" as Gordon Lightfoot so memorably sang in \"The Wreck of the Edmund Fitzgerald.\" The Mataafa storm of November 27-28, 1905 claimed the lives of 36 seamen on 29 wrecked vessels, including the schooner barge Madeira, which foundered on the rocks of Silver Bay, Minnesota. The decision was made to erect a lighthouse near the spot as a guide to future mariners. Perched on a 133-foot tall sheer cliff, the Split Rock Lighthouse, first lit on July 31, 1910, became an instant tourist attraction and remains to this day one of the most picturesque and visited lighthouses in the United States.\u003cbr\u003eUgears' Split Rock Lighthouse model is a beautiful DIY wooden reproduction of the iconic Minnesota beacon, with its octagonal tower and attached keeper's house, and joins the Lighthouse of Alexandria in the Ugears collection of world lighthouses. With its warm LED light, powered either by USB-C (via phone charging) or three AA batteries, the model also serves as a functional nightlight for your home, office, or a child's bedroom. On the side of the quaint house, near the base, you'll find the charging port and an on\/off switch. Batteries are easily replaced from their tray under the model, while the LED light can also be easily replaced if needed by twisting and removing the cupola from the tower. \u003cbr\u003eCrafted from art-quality 3mm composite wood, the model's dimensions are 19,8 х 24 х 11,6 cm, the perfect size for a nightstand. There are windows throughout the keeper's house and tower, while the house features a chimney and stepped entryway. Laser engraving on the exterior surfaces reproduce the look of stone and brickwork. In addition to the twist-and-remove cupola, the door of the keeper's house opens and shuts with a rubber band mechanism and windows on the keeper's house feature curtains that sway when tilted.\u003cbr\u003eThe Split Rock Lighthouse is a \"Intermediate\" DIY model with 295 parts, promising 6+ hours of engaging build time. The kit includes natural composite wood parts in laser pre-cut boards, electrical components, LED light, and a piece of sandpaper and wax for smoothing and lubricating the pieces. You won't need glue or special tools to assemble your Split Rock Lighthouse—just push the pieces out of the boards then snap them together following the illustrated step-by-step instructions in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Portuguese, Japanese, Italian, Chinese and Korean). Make sure electrical components are working properly before proceeding with the build. Once complete, you can sit back and admire your charming creation and the warm glow it gives any room, and imagine the life of a lighthouse keeper on a windswept cliff along the shores of Lake Superior.\u003cbr\u003eStart your collection of Ugears lighthouses today with the beautiful and historic Split Rock Lighthouse, the pride of Minnesota and friend to Lake Superior sailors for well over 100 years. This 3D puzzle will appeal to lighthouse lovers, wooden modeling enthusiasts, and anyone looking to add a soft warm light and cozy design touch to their home interior. Perfect as a gift, either as a kit in the box, or as an already-completed model lighthouse and nightlight you have built with your own hands. Let the Split Rock Lighthouse from Ugears warm your home with its cheery light!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eModel size: 19.8 x 24 x 11.6 cm\u003cbr\u003ePackage size: 37.3 x 17 x 5 cm\u003cbr\u003eNumber of components: 295\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEstimated time of assembly: 6 hours\u003cbr\u003eLevel: Medium\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":52374013149523,"sku":"70258","price":73.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_5494.jpg?v=1763068665"},{"product_id":"r2-d2™","title":"R2 D2™","description":"\u003cp\u003e\u003cstrong\u003eAssemble me. Let the light reveal a message from the stars!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuild your own loyal astromech droid with R2-D2™ from the Star Wars™ collection by Ugears. Small in size but big in personality, this highly detailed and colorized 3D wooden model captures the beloved droid’s unmistakable design. R2-D2 has served legendary heroes like Anakin Skywalker, Padmé Amidala, and Luke Skywalker—and now he’s ready to serve you. Fully equipped with movable legs for two display poses and a functional LED projector that beams real Star Wars images through his “eye,” this model brings galactic charm to any shelf.\u003cbr\u003eR2-D2 by Ugears runs thanks to a spring-powered internal mechanism. Twist the disc hidden beneath the head to wind it up, set the droid in position, and press the Start\/Stop lever to watch him roll forward—just like in the movies. Flip the switch on top to activate the battery-powered mini projector and display colorful Star Wars scenes. The interchangeable slides are stored in a special compartment inside the body and can be swapped out using the included tool. Whether standing tall or leaning into action, this clever little droid is always ready with a message from the stars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eR2-D2™ features:\u003c\/strong\u003e\u003cbr\u003eSpring-powered mechanical drive wound by turning the head disc\u003cbr\u003eStart\/Stop lever triggers rolling motion\u003cbr\u003eTwo pose options: upright or tilted forward\u003cbr\u003eBattery-powered LED projector shines images through the eye\u003cbr\u003eSeveral interchangeable slides stored inside the body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmazing realism and collector appeal:\u003c\/strong\u003e\u003cbr\u003eIconic blue-and-white styling in full-color plywood and cardboard\u003cbr\u003eAuthentic details modeled after the original droid\u003cbr\u003eAssembles without glue or special tools\u003cbr\u003eStep-by-step instructions in 11 languages\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":52405718319443,"sku":"70272","price":60.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_5215.jpg?v=1763411991"},{"product_id":"tie-fighter™","title":"TIE Fighter™","description":"\u003cp\u003e\u003cstrong\u003eAssemble me. Swarm the rebel fleet with Imperial fighters!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeel like joining the dark side as you build and fly the Star Wars™ TIE Fighter™ spaceship from the licensed Star Wars collection by Ugears. The Twin Ion Engine or TIE Fighter, with its ball cockpit and hexagonal wings, is the iconic starfighter of the Galactic Empire. Agile yet vulnerable, the TIE Fighter is a feared and formidable foe, whether in dogfights or providing close air support against ground-based rebel forces.\u003cbr\u003eThis battery-powered DIY model, made of colored plywood, set includes the starfighter and a stand designed to resemble the surface of the Death Star. The ship attaches to the stand magnetically, making it easy to connect and detach. A small, battery-powered motor is concealed inside the stand to provide realistic flight maneuvering for your Fighter. Two laser cannon towers also move side-to-side to lay down a blanket of fire against incoming X-wings. The top hatch of the TIE Fighter's cockpit opens to reveal interior details. Wings include cardboard elements. Model is powered either by three AA batteries (not included) or via USB Type-C (Power banks and Type-C cable not included).\u003cbr\u003eThe TIE Fighter model stand is compatible with the stand for Luke Skywalker’s X-Wing Fighter from the official Star Wars collection by Ugears. Together, they create a larger Death Star surface area, putting you right into the action of the climactic Trench Run scene from the original Star Wars film.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIE Fighter™ features:\u003c\/strong\u003e\u003cbr\u003eFighter and stand dual model with battery-powered motor\u003cbr\u003eSide-to-side fighter movement\u003cbr\u003eMagnetic stand mount\u003cbr\u003eStand recreates the surface look of the Death Star\u003cbr\u003eTwin laser cannon towers move side-to-side\u003cbr\u003eCockpit hatch opens to reveal interior details\u003cbr\u003eColored plywood for enhanced visual realism\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmazing realism, easy assembly:\u003c\/strong\u003e\u003cbr\u003eFighter executes evasive flight maneuvers\u003cbr\u003eTwin laser cannon towers set up sweeping firing lines\u003cbr\u003eIncredible surface detail puts you in the scene\u003cbr\u003eAssembles without glue or tools\u003cbr\u003eStep-by-step instructions in 11 languages\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":52405775827283,"sku":"70270","price":98.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_1930.jpg?v=1763412969"},{"product_id":"luke-skywalker-s-x-wing-starfighter™","title":"Luke Skywalker`s X-Wing Starfighter™","description":"\u003cp\u003e\u003cstrong\u003eAssemble me. Join the Red Squadron's attack on the Death Star!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeel like becoming part of the Rebel Alliance and join in the dogfights over the Death Star when you build Star Wars™ Luke Skywalker`s X-Wing Starfighter™ spaceship from the licensed Star Wars collection by Ugears. The X-Wing was the last line of defense against the Galactic Empire's planet-killing superweapon, and takes its name from the position of the S-foils when in attack position. Outmaneuver the TIE fighter and use the Force to take the shot that will save the Galaxy!\u003cbr\u003eThis two-in-one model includes a stand styled to resemble the surface of the Death Star. Inside the stand, a motor-powered swing mechanism recreates the X-Wing’s maneuvering, as seen in the original Star Wars film. The fighter and stand connect and detach with a magnet. Several movable features bring excitement and realism: the cockpit canopy opens, front and rear landing gear can be removed, a button styled as R2-D2 atop the fuselage opens a lower hatch, but the main mechanical feature are the S-foils that open and lock into attack position. Model is powered by three AA batteries or via a USB Type-C connection (batteries and USB connector not included). \u003cbr\u003eLuke Skywalker’s X-Wing Fighter is compatible with the TIE Fighter model from the Ugears official Star Wars collection—these can be joined together using included connectors. Combined, they create a larger Death Star surface area, putting you right into the action of the climactic Trench Run scene from the original Star Wars film.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLuke Skywalker`s X-Wing Starfighter™ features:\u003c\/strong\u003e\u003cbr\u003eFighter and stand dual model with battery-powered motor\u003cbr\u003eSide-to-side fighter movement\u003cbr\u003eMagnetic stand mount\u003cbr\u003eStand recreates the surface look of the Death Star\u003cbr\u003eS-foils that open and lock into attack position\u003cbr\u003eCockpit canopy opens, R2-D2 button opens lower hatch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmazing realism, easy assembly:\u003c\/strong\u003e\u003cbr\u003eSide-to-side motion mimics flight above the Death Star\u003cbr\u003eTransparent acrylic mount creates a floating effect\u003cbr\u003eIncredible surface detail puts you in the scene\u003cbr\u003eAssembles without glue or special tools\u003cbr\u003eStep-by-step instructions in 11 languages\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":52405858533715,"sku":"70269","price":98.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_1780.jpg?v=1763413906"},{"product_id":"at-st-walker™","title":"AT-ST Walker™","description":"\u003cp\u003e\u003cstrong\u003eAT-ST Walker™\u003c\/strong\u003e\u003cbr\u003eAssemble me. Conduct reconnaissance missions in the Empire's light patrol vehicle!\u003c\/p\u003e\n\u003cp\u003eThe two-legged All Terrain Scout Transport – Star Wars™ AT-ST™ – from the licensed Ugears series is a spring-powered two-legged light patrol vehicle from the Galactic Empire's fearsome arsenal. Fans of the Star Wars  saga will recognize these infantry war machines from the battles on Hoth and Endor, as seen in The Empire Strikes Back (1980) and Return of the Jedi (1983). Watch out for Ewok traps and ramming logs!\u003c\/p\u003e\n\u003cp\u003eThe AT-ST Walker is spring-powered and moves slowly and organically, closely resembling its cinematic counterpart, over distances of 60–80 cm. The head rotates side-to-side when the model is in motion to set up sweeping firing lines. Chin-mounted blaster cannons, and cheek-mounted light blaster and grenade launcher manually rotate up and down, while cockpit windows and top hatch open manually. The model is made from colored plywood, with detailed artwork on the exterior for a realistic appearance. It also includes metal components for enhanced durability and stability. Wind the AT-ST Walker by inserting the concealed key into the right side of the \"head,\" and twist counterclockwise. Hold the Walker's body while winding (do not hold by the head or legs as these are less sturdy). Set the model on a flat surface and press down on the start\/stop switch, located on the front of the body, to send the AT-ST on its mission to mop up pockets of rebel resistance! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e AT-ST Walker™ features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpring-loaded mechanical motor with hidden winding key\u003cbr\u003eBipedal locomotion over distances of 60-80 cm\u003cbr\u003eRotating cockpit\u003cbr\u003eRealistic movable blasters and grenade launcher\u003cbr\u003eOpening top hatch and windows\u003cbr\u003eAmazing realism, easy assembly:\u003cbr\u003eDeliberate, slow-motion walker strikes fear into rebel soldiers!\u003cbr\u003eRotating cockpit sets up sweeping firing lines\u003cbr\u003eAssembles without glue or tools\u003cbr\u003eStep-by-step instructions in 11 languages\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":52455652393299,"sku":"70268","price":94.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_2543.jpg?v=1763938278"},{"product_id":"millennium-falcon™","title":"Millennium Falcon™","description":"\u003cp\u003e\u003cstrong\u003eAssemble me. Fly the fastest ship in the galaxy!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMake the Kessel Run in less than twelve parsecs when you build the Star Wars™ Millennium Falcon™ spaceship from the licensed Star Wars collection by Ugears. At 1:75 scale, this amazing model of the ship flown by lovable smugglers Han Solo and Chewbacca is the largest and most detailed model ever released by Ugears. A key fighter of the most pivotal battles against the Galactic Empire, the Millennium Falcon passed through the hands of a string of criminals until it was eventually stolen and piloted by Rey Skywalker in The Force Awakens (2015), before being reclaimed by Han and Chewie.\u003cbr\u003eThe Millennium Falcon features highly detailed, colorized elements on the exterior and interior that replicate the look of the ship in the Star Wars films, as well as battery-powered blue LED lights that simulate the glow of the hyperdrive engine. Movable elements include the boarding ramp, cargo bay door, landing gear, gun turrets, rotating 360° antenna, and retractable roof that opens to display the amazing detailed realism of the ship's interior. High density fiberboard and cardboard elements bring added durability and interest. Build and own a piece of cinematic history with this absolute showstopper 3D model of the Millennium Falcon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMillennium Falcon™ features:\u003c\/strong\u003e\u003cbr\u003eBattery-powered LED lights that simulate hyperdrive engine\u003cbr\u003eRetractable roof reveals interior detailing\u003cbr\u003eCargo bay door opens and closes\u003cbr\u003eBoarding ramp lowers and raises\u003cbr\u003eMovable gun turrets top and bottom\u003cbr\u003eRotating 360° antenna \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmazing realism:\u003c\/strong\u003e\u003cbr\u003eExterior and interior detailing replicates the look of the iconic spaceship\u003cbr\u003eColored elements bring rugged beauty and realism\u003cbr\u003eHigh density fiberboard gives added durability\u003cbr\u003eToggle switch turns battery-powered LED lights on\/off\u003cbr\u003eAssembles without glue or tools\u003cbr\u003eStep-by-step instructions in 11 languages\u003cbr\u003e\u003c\/p\u003e","brand":"UGears Suomi","offers":[{"title":"Default Title","offer_id":52455757611347,"sku":"70271","price":195.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0591\/5580\/8465\/files\/DSC_2713.jpg?v=1763940522"}],"url":"https:\/\/ugears.fi\/en\/collections\/gifts-for-him.oembed","provider":"UGears Suomi","version":"1.0","type":"link"}